Visonicom V4G1205D 4G LTE 11ac 1200Mbps dualband wireless router/wireless CPE gigabit Ethernet is manufactured for fast, stable, and convenient internet service for home and office. The 2T2R 300Mbps 2.4GHz + 2T2R 867Mbps 5GHz 4G WiFi router supports the following 4G/3G/2G radio access technologies: LTE FDD and/or TDD, HSPA+, HSPA, UMTS, EDGE, CDMA2000, GPRS. It supports PPTP, L2TP VPN client and/or PPTP, L2TP VPN pass-through, IGMP proxy and MLD for IPTV, TR069 remote management, and Multiple SSID. Its working modes include AP/gateway, Wireless WDS, Wireless Repeater and Wireless client.
Basic Features:
* Support dual duplex modes FDD and TDD
* Supports multiple 4G/3G/2G Frequency Channels
* 802.11b/g/n 300Mbps + 11ac 867Mbps dualband WiFi
* Gigabit Ethernet Ports
* VPN Support (PPTP, L2TP client and/or PPTP, L2TP pass through)
* Link failover between ADSL(PPPOE, DHCP, Static IP) and 4G is supported
* TR069 Remote Management Support
* IGMP proxy and MLD for IPTV
* Supports AP/gateway, Wireless WDS, Wireless Repeater and Wireless client
* IPV6 Support
* Low-voltage, over current, over voltage, anti-reverse protection
* Configuration couldn’t be easier with native web-server setup.
* Router factory default settings can be configured freely.
* Parameters backup and import
* Static Routing and Port Forwarding
* Support QoS, IP and MAC address filtering
* Support DNS and DDNS
* LEDs for status monitoring
* High gain 5dBi external antenna for WiFi and 4G
V4G1205D LTE Router Product Specifications:
Hardware Parameters | |
Chipset | RTL8197FS+RTL8812BRH+RTL8367 |
CPU Frequency | 1000MHz |
Memory | 64MB or 128MB 16-bit DDR2 SDRAM |
Flash | 8MB |
WiFi | 2T2R 2.4GHz 802.11b/g/n, 300Mbps, 2T2R 5.8GHz 802.11AC, 867Mbps |
Device Interfaces | 1*LTE interface |
4*RJ45 10M/100M/1000M LAN Ethernet interfaces | |
1*RJ45 10M/100M/1000M WAN Ethernet interfaces | |
1*Reset button | |
1*WPS button | |
1*Power jack | |
1*Power switch | |
1X USB 2.0 | |
WiFi Antenna | 2*5dBi external dual-band antenna (2.4G and 5.8G WiFi Antenna Combiner ) |
LTE Antenna | 2*5dBi external antenna |
LTE Support Bands | |
EC25-E | FDD LTE:B1/B3/B5/B7/B8/B20;TDD LTE:B38/B40/B41; |
WCDMA:B1/B5/B8;GSM:900/1800 | |
EC25-V | FDD LTE:B4/B13 |
EC25-A | FDD LTE:B2/B4/B12; WCDMA:B2/B4/B5 |
EC25-AUT | FDD LTE:B1/B3/B5/B7/B28; WCDMA:B1/B5 |
LM923S | TDD LTE: B42, B43+B38 B40 B41 |
SLM750-G1A | FDD LTE: B1/3/5/8 |
SLM750-G2C | FDD LTE: B2/4/5/7/28; WCDMA: B2/4/5; |
SLM750-G2D | FDD LTE: B1/3/5/8; TDD LTE: B40; WCDMA: B1/8, |
SLM750-G2E | FDD LTE: B1/3/5/7/8/20; WCDMA: B1/8, |
Notes: | Bands not listed or need customization? Please contact us. |
WiFi Features | |
Standard | 802.11b/g/n/ac |
11N: 2.4~2.4835GHz, 11AC: 5.150~5.825GHZ | |
Korea, Japan, ETSI, FCC channels can be selected | |
Modulation Schemes | OFDM = BPSK,QPSK, 16-QAM, 64-QAM 256-QAMc |
DSSS = DBPSK, DQPSK, CCK | |
Transfer Rate | HT20: up to 144 Mbps; HT40: up to 300 Mbps; VHT80: up to 866Mbps |
Software Features | |
General | RFC0768 UDP |
RFC0791 IP | |
RFC0792 ICMP | |
RFC0793 TCP | |
RFC0826 Ethernet ARP | |
RFC0894 IP over Ethernet | |
RFC0922 Broadcasting Internet Datagrams | |
RFC0950 Internet Standard Subnetting | |
IEEE802.3 Ethertype | |
IEEE802.1p | |
IEEE 802.11b | |
IEEE 802.11g | |
IEEE 802.11n | |
RFC2516 PPP Over Ethernet (PPPoE) | |
RFC1662 PPP in HDLC-like Framing | |
RFC1332 PPP Internet Protocol Control Protocol | |
RFC1042 A standard for the Transmission of IP Datagrams over IEEE 802 Networks | |
IPoE (a.k.a IP over Ethernet over AAL5) | |
DHCP server, client | |
NAT,NAPT and ALG | |
DMZ and Port forwarding(Virtual server) | |
PPTP, L2TP VPN, OPENSWAN IPSEC VPN | |
IGMP proxy and MLD for IPTV | |
Logs and statistics | |
TR-069 remote management | |
Flexible and secure SPI Firewall, Denial of Service (DoS) protection | |
Port filtering , IP filtering and MAC filtering | |
URL filter | |
QOS Flow Control | |
DDNS | |
IPV6 | |
Static route | |
SNTP Date/time update from Internet Time Server | |
ETH WAN link-backup via 3G/4G module | |
WEB GUI | |
Embedded AP with 4 SSIDs | |
Wireless WDS | |
Wireless Repeater | |
Wireless client mode | |
Separate authentication for each SSID | |
Wireless schedule | |
Environment Requirement | |
Operating Temperature | 0°C~40°C |
Storage Temperature | -20°C ~ 90°C |
Operating Humidity | 5%~95% (typical) |
Power Supply | 12V/1.5A |
EMC/Safety | |
Regulation Compliance | CCC, CE, FCC |
Safety Regulations | UL |
Green Standard | RoHS |