Visonicom V4G953M/V4G953ML is a WiFi LTE MiFi router 4G portable router modem manufactured with built-in 4G LTE module sim card slot and battery. It universally supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4G LTE module SIM card slot, simply insert a standard 4G LTE SIM/USIM card, the portable LTE WiFi router 4G wireless MiFi router modem works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the travel wireless 4G MiFi router LTE WiFi router modem V4G953M/V4G953ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The mobile WiFi 4G router LTE wireless travel router supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G953M/V4G953ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G952M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G952ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
Visonicom V4G308D LTE CPE 300Mbps wireless 4G router is designed to offer fast, stable, and convenient internet service for home and office. The 2T2R 300Mbps 4G WiFi CPE supports TDD B42 3500MHz, B41 2500MHz, B38 2600MHz and FDD B1 B2 B3 B4 B5 B7 B8 B20 B28 B32 B255, also backward supports HSPA+/HSUPA/HSDPA/WCDMA, CDMA EVDO Rev B/Rev A/CDMA, EDGE/GPRS/GSM.
With the built-in 4G module SIM card slot, simply put a standard 4G SIM/USIM card, the 4G/LTE mobile hotspot works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 30 users (recommended, max 254 users theoretically) with 300Mbps WiFi transfer.
Besides FDD/TDD LTE 4G internet, it also allows multiple internet access such as PPPoE, DHCP client, Static IP, PPTP and L2TP.
Main Features
* TDD-LTE: Supports TDD BAND38/39/40/41/42 (customizable)
* LTE FDD: Supports FDD BAND1/2/3/4/5/7/8/20/28/32/255(customizable)
* TD-SCDMA: Supports TD-SCDMA BAND34/39(customizable)
* WCDMA: Supports WCDMA BAND1/2/5/8(customizable)
* GSM: Supports GSM 850, EGSM, DCS, PCS
* WiFi: Supports IEEE802.11b/g/n , band 2.4G
* LAN: SupportsRJ45 x 2(10/100Mbps Ethernet)
V4G308D LTE Router Product Specifications:
General | ||||||
Item | Description | |||||
Product | LTE CPE V4G308D | |||||
Indicator Light | Power, WiFi, WPS, LAN*2, Network ( LTE/3G Signal) | |||||
Temperature | -10℃ ~ 40℃ for storage; -40℃ ~70℃ for working | |||||
Humidity | Working Humidity 90-95%; Storage Humidity: 10 ~ 95% | |||||
Power Supply | 5V 2A DC Supply | |||||
LAN | RJ45 Fast Ethernet Port *2 | |||||
USIM&SIM | Standard 8PIN port | |||||
USB | USB port, supports MicroSD card, also can use 3G/4G USB modem | |||||
Button | Power On/Off, WPS, Reset | |||||
LTE Antenna | Internal Antenna, External Antenna | |||||
WiFi Antenna | Internal Antenna, External Antenna | |||||
Supports Standard | 3GPP R8,R9 | |||||
Peak Power | TD-LTE: DL/UL 150/50 Mbps (Category 4) | |||||
Rx Diversity | Supported | |||||
Antenna | Internal MIMO Antenna | |||||
Equalization | Support | |||||
Authentication | Support IP and PPPTYPE; Support PAP/CHAP authentication. | |||||
Package Box | Customizable | |||||
Package Contents | CPE; DC Adapter; QIG | |||||
4G RF Specification | ||||||
Item | Min | Typical | Max | Unit | Remarks | |
Frequency Range | TDD | 3600 | 3700 | 3800 | MHz | Band 43 |
3400 | 3500 | 3600 | MHz | Band 42 | ||
2496 | 2500 | 2690 | MHz | Band 41 | ||
2300 | 2300 | 2400 | MHz | Band 40 | ||
1880 | 1900 | 1920 | MHz | Band 39 | ||
2570 | 2600 | 2620 | MHz | Band 38 | ||
FDD | 1710 | 1780 | MHz | Band 66 | ||
452.5 | 457.5 | MHz | Band 31 | |||
703 | 748 | MHz | Band 28 | |||
832 | 862 | MHz | Band 20 | |||
880 | 900 | 915 | MHz | Band 8 | ||
2500 | 2690 | MHz | Band 7 | |||
824 | 849 | MHz | Band 5 | |||
1710 | 1755 | MHz | Band 4 | |||
1710 | 1880 | MHz | Band 3 | |||
1850 | 1900 | 1910 | MHz | Band 2 | ||
1920 | 2170 | MHz | Band 1 | |||
TDS | 2010 | 2025 | MHz | Band 34 | ||
1880 | 1920 | MHz | Band 39 | |||
WCDMA | 1920 | 2170 | MHz | Band 1 | ||
1850 | 1910 | MHz | Band 2 | |||
824 | 894 | MHz | Band 5 | |||
Channel Bandwidth | 10/20 | MHz | ||||
Output Power @ 25 °C | 23 | dBm | 23 ±2 dBm | |||
Transmit Power Dynamic Range | 65 | dB | ||||
Sensitivity (MRC) | dBm | @10MHz QPSK | ||||
Sensitivity (MRC) | dBm | @20MHz QPSK | ||||
WiFi Specification | ||||||
Parameter | Description | |||||
WiFi Standard | 802.11 b/g/n(2*2) | |||||
Frequency | 2.4~2.4835GHz | |||||
Users | 32 | |||||
Spread Frequency | DSSS | |||||
Modulation | 1M DBPSK | |||||
2M DQPSK | ||||||
5.5M, 11M CCK | ||||||
6M, 9M, 12M, 18M, 24M, 36M, 48M, 54M,…300M OFDM | ||||||
Transmission Range | Indoors up to 50m | |||||
RF Power | 17dBm(Max) in 11b mode | |||||
17dBm(Max) in 11g mode | ||||||
16dBm(Max) in 11n mode/chain | ||||||
Receiving Sensitivity | 300M: -61dBm@10% PER | |||||
54M:-68dBm@10% PER | ||||||
11M:-85dBm@8% PER | ||||||
6M:-88dBm@10% PER | ||||||
1M:-90dBm@8% PER | ||||||
Rate | 11n:300 Mbps /…/6.5Mbps(Auto Rate Sensing) | |||||
11g:54/48/36/24/18/12/9/6 Mbps (Auto Rate Sensing) | ||||||
11b:11/5.5/2/1 Mbps (Auto Rate Sensing) | ||||||
Encryption Algorithm | Support 64/128/152 bits WEP encryption; | |||||
Support WPA/WPA2: | ||||||
–Authentication: 802.1x, Pre-Shared Key (PSK) | ||||||
–Encryption: AES, TKIP | ||||||
Software | ||||||
Parameter | Description | Remarks | ||||
Standard | 3GPP R9 | |||||
Configuration | Auto channel scanning and selection | |||||
Configurable BS profiles (frequency, bandwidth) | ||||||
Local Web GUI | The Web GUI utilizes HTTPs for logging on to the device, it’s easy to control the device. | |||||
Debug Mode | RSSI level; Packet error rate; CINR; Dynamic Tx power Modulation | |||||
Encryption/Decryption | AES; SNOW3G; NULL | |||||
MIMO | 2*2 MIMO, Transmission Mode4(Close-loop spatial multiplexing) PDSCH | |||||
Beam forming(Part of LTE) | Transmission Mode 7 | |||||
Power Control(LTE) | DL Power Control; UL Power Control | |||||
Device Management | - Web Access(Local) | |||||
WAN Interface | Static IP (IP/Subnet/Gateway/DNS); DHCP Client; NTP client | NAT mode | ||||
LAN Interface(Ethernet) | NAT mode; | Customized | ||||
IPV4,IPv6 | Internet Protocol v4/v6 ICMPv6 | |||||
VPN Tunneling | PPTP(supported by later release) | |||||
DHCP Server | Specify private IP range to be assigned to LAN users | |||||
Start IP and End IP (253 users) | ||||||
Netmask | ||||||
Lease time | ||||||
Firewall | IP-based filter | |||||
Port- (Protocol-) based filter | ||||||
MAC-based filter | ||||||
Security | Port Forwarding, DMZ support; | |||||
Firewall for URL filter, MAC filter, DDos ; | ||||||
Support PIN and PUK based SIM card security; | ||||||
WAN Access Control; | ||||||
Remote access control (HTTP). | ||||||
DNS | DNS relay/ DNS cache | |||||
Services | - Broadcasting | |||||
- Multicasting | ||||||
Software Update | Supports Updating Local Software |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
VNU-G5017V is a 2T2R wireless GPON ONU/ONT for FTTB/FTTH/FTTO broadband access for home and SOHO users with VoIP support. The VNU-G5017V 300Mbps GPON HGU (Home Gateway Unit) is based on the stable and mature GPON technology of cost effectiveness, and the technology of layer-2 Ethernet switch as well. It is highly reliable and easy to maintain, with guaranteed HQoS, and fully compliant to ITU-T G.984 GPON standards.
VNU-G5017V ONU/ONT supports standard OMCI, which provides up to 1.25Gbps uplink and 2.5Gbps downlink high-speed transfer rate.
Product Features
* GPON WAN port with 1.244Gbps uplink / 2.488Gbps downlink link speed;
* Active Ethernet WAN port with 1.25Gbps bi-direction link speed;
* 1x 10/100/1000BASE-T Ethernet RJ45 Ports; 3x 10/100 BASE-T Ethernet RJ45 Ports
* Support 802.11n 2T2R speed up to 300Mbps;
* 2x FXS RJ11 ports for Voice service;
* 1x USB ports in host or device mode;
* Meet the requirements of ITU-T G.9841/2/3/4 standard and G987.3 protocol;
* Supports G984 standard PLOAM;
* Embedded OAM and OMCI processing;
* Supports bridging and NAT mode of BOB technology
* Supports L2/L3 multicast forwarding, L2 bridge, L3 routing and NAPT and other business processing functions;
* Supports IPv4 and IPv6 dual stack as well as DS-Lite, 6RD function;
* Supports rich and flexible flow classification function;
* Supports HQoS (Hiberarchy Quality of Service) to achieve hierarchical QoS;
Specifications:
Hardware | CPU | ZX279127+MT7603E+Le9642 |
Flash | NAND Flash 1Gbit | |
DDR | 1Gbit | |
Ethernet | Standard | IEEE802.3 |
IEEE802.3au | ||
IEEE802.3x | ||
Interface | 1*10/100/1000BASE-T And 3*10/100BASE-T RJ45 | |
Auto negotiation | ||
Auto MDI/MDIX | ||
GPON | Speed | Downlink: 2.488Gbps |
Uplink: 1.244Gbps | ||
Connector | SC/APC, pigtail | |
Standard | ITU-T G.984.2 , Class B+ | |
Power Level | Downlink | |
Wavelength: 1490nm | ||
Sensitivity: -27dBm | ||
Saturation: -9dBm | ||
Uplink | ||
Wavelength: 1310nm | ||
TX power: 0.5 ~ 5dBm | ||
RMS: 0.5nm | ||
Fiber | G.652 Single Mode Fiber | |
WiFi | WiFi | TX Power (11n MCS7): 19+2dBm |
EVM (11n MCS7): <-30dB | ||
Data Rate (11n HT40): up to 300Mbps | ||
Antenna | 2.4G antenna: 5dBi | |
VoIP | REN | Max 5REN |
Connector | 2* RJ11 | |
Ringing | 65V RMS ringing voltage | |
USB | Max 1A for each port | |
Physical & Environmental | Power Supply | 12V DC,1A |
Power Consumption | ≤24W | |
Weight | ≤0.6kg | |
Working Temperature | -5ºC~50ºC | |
Storage Temperature | -40ºC~55ºC | |
Working Humidity | 5%~95% no condensing | |
Storage Humidity | 5%~95% no condensing | |
Product specifications may vary from country to country, operator to operator, and we would like to suggest you to confirm the specifications of the products currently being sold with local operators, distributors or retailers. Also, you’re encouraged to check with us for more GPON products, which are now shown here on our website. |
VNU-G5004W is a 2T2R wireless GPON ONU for FTTH broadband access for home and SOHO users. The VNU-G5004W 300Mbps GPON HGU (Home Gateway Unit) is based on the stable and mature GPON technology of cost effectiveness, and the technology of layer-2 Ethernet switch as well. It is highly reliable and easy to maintain, with guaranteed HQoS, and fully compliant to ITU-T G.984 GPON standards.
Product Features
* Meets the requirements of ITU-T G.9841/2/3/4 standard and G987.3 protocol;
* Supports G984 standard PLOAM;
* Embedded OAM and OMCI processing;
* Supports bridging and NAT mode of BOB technology
* Supports L2/L3 multicast forwarding, L2 bridge, L3 routing and NAPT and other business processing functions;
* Supports IPv4 and IPv6 dual stack as well as DS-Lite, 6RD function;
* Supports rich and flexible flow classification function;
* Supports HQoS (Hiberarchy Quality of Service) to achieve hierarchical QoS;
* WiFi b/g/n 2T2R up to 300Mbps
Specifications:
Hardware | |
CPU Architecture | ARM Cortex A9 |
Chip | ZX297112 |
FLASH | NAND FLASH 1Gbit |
RAM | DDR3:1Gbit |
WiFi | MT7603 |
Hardware appearance and interface | |
Network end | GPON |
User end | Four 10/100M Ethernet port + 300Mbps WiFi |
Software Characteristics | |
Support online upgrade | Yes |
Support remote management | Yes |
Power Specifications | |
Power adapter input | AC 100~240V, 50/60Hz |
Whole machine power supply | DC12V/0.5A |
Physical & Work Environment | |
Working Temperature | -10°C~45°C |
Working Humidity | 0~90% |
Dimensions | L162*W112.5*H41mm |
Product specifications may vary from country to country, operator to operator, and we would like to suggest you to confirm the specifications of the products currently being sold with local operators, distributors or retailers. Also, you’re encouraged to check with us for more GPON products, which are now shown here on our website. |
VNU-G5001 is a GPON ONU for FTTH broadband access for home and SOHO users. The VNU-G5001 GPON SFU (Single Family Unit) is based on the stable and mature GPON technology of cost effectiveness, and the technology of layer-2 Ethernet switch as well. It is highly reliable and easy to maintain, with guaranteed HQoS, and fully compliant to ITU-T G.984 GPON standards.
Product Features:
* Meet the standard of 802.3-2005, energy saving requirements of CTC2.1 and EPON equipment technical requirements of CTC;
* Support L2/L3 multicast forwarding, L2 bridge, L3 routing and NAPT and other business processing functions;
* Support for IPv4 and IPv6 dual stack and DS-Lite, 6RD function;
* Support rich and flexible flow classification function;
* Support HQoS (Hiberarchy Quality of Service) to realize hierarchical QoS.
Specifications:
Hardware | |
CPU | ZX297110A |
FLASH | NOR FLASH 64M bit |
DDR3 | 512M bit |
SLIC | Le9641 |
Specifications | |
GPON Protocol Specification | Comply ITU-T G.984 GPON standard: |
G.984.1 general characteristics | |
G.984.2 physical Media Dependent (PMD) layer specifications | |
G.984.3 transmission convergence layer specifications | |
G.984.4 ONT management and control interface specification | |
Support DS/US transmission rate to 2.488 Gbps/1.244 Gbps | |
Wavelength: 1490 nm downstream & 1310 nm upstream | |
Comply with class B+ type PMD | |
Physical distance reach to 20 km | |
Support Dynamic Bandwidth Allocation (DBA) | |
GPON Encapsulation Method (GEM) supports Ethernet packet | |
Supports GEM header removal/insertion and data extraction/segmentation (GEM SAR) | |
Configurable AES DS and FEC DS/US | |
Support up to 8 T-CONs each with priority queues (US) | |
Network Protocol Specifications | 802.3 10 Base T Ethernet |
802.3u 100 Base TX fast Ethernet | |
802.3z 1000 Base TX fast Ethernet | |
ANSI/IEEE 802.3 NWay auto-negotiation | |
802.1Q VLAN tagging/un-tagging | |
Support flexible traffic classification | |
Support VLAN staking | |
Support VLAN Intelligent Bridging and Cross Connect mode | |
Interface | WAN: One Giga optical interface (SC/APC or UPC) |
LAN: 1 10/100/1000 auto MDI/MDI-X RJ-45 ports | |
Power supply: 12 V DC, 0.5 A | |
Voice Functionality | Codecs: G.711 a/u, G.723, G.726 |
DTMF tone: detection and generation | |
Security | WPA/WPA2, 64/128 bit WEP data encryption |
Firewall,Dos Protection | |
WAN Networking | Static IP WAN connection |
DHCP client WAN connection | |
PPPoE WAN connection | |
Management | Standard OMCI (G.984.4) |
Web GUI (HTTP/HTTPS) | |
Firmware upgrade via FTP/TFTP/HTTP | |
Telnet, Web, SSH | |
CLI command via telnet/console | |
Two-level administration privilege for web configuration | |
Configuration backup/restore | |
Power Specifications | Power adapter input: 100~240V/AC 50/60Hz |
Whole machine power supply: 12V DC | |
LED Indicators | Power, PON,LOS, INTERNET, LAN |
Product Size | L130*W102*H32 mm |
Work Environment | Working Temperature: -10°C~55°C |
Warranty Clause | 12 months |
VPA1201 is the latest HomePlug AV2 1.2Gbps Ethernet Bridge with the concept of No New Wires data communications, and it transforms your in-house powerline into a networking infrastructure. It provides SmartLink Plus coupling to the Line-Neutral pair and the Line-Ground pair of the AC mains. It successfully reduces "dead spot" of network coverage, increase throughput and increase network coverage within a home. Surf the Internet and share data at the speed up to 1.2Gbps (PHY rates) through powerline.
VPA1201 Smart Link powerline bridge 1200Mbps is based on Qualcomm Atheros QCA7500 chipset. It features faster processing power, Gigabit Ethernet host interfaces and an enhanced analog front end. The 1200Mbps powerline adapter is compliance with IEEE1901, HomePlug AV2, hence allowing hassle free compatibility with existing HomePlug AV2 devices and other suppliers of IEEE1901 PLC (Powerline Line Communication) devices, of course, VPA1201 and our Wireless HomePlug AV2 wireless 1200Mbps + 1200Mbps model VPA1201W are preferred.
VPA1201 powerline adapter 1200Mbps Ethernet extender is a sharp weapon for video surveillance and Network extending.
Features
* High-Speed powerline adapter with Ethernet interface for fast data transfer over the existing household power supply;
* High-speed transfer rates of 1200Mbps;
* No need new wires and use at any power socket up to the range of 500 meters
* Simple plug and easy to install
* Fully compliant with IEEE802.3/802.3u, HomePlug AV/ HomePlug AV2 standard;
* Provide 128-bit AES link encryption for Powerline networks; Up to 1200Mbps data rate on Powerline networking;
* Allow user to connect PCs and other devices conveniently via any power outlet at home;
Specifications
Item | Powerline Adapter Model VPA1200 |
Interface | 1*LAN10/100/1000Mbps Base-TX applied for RJ45 interface |
LED display lights | HomePlug |
Transmission band | 2-68MHz |
Protocol | HomePlug AV2 |
IEEE 802.3 | |
IEEE 802.3u 10/100/1000Ethernet Standard | |
Security | 128-AES |
Transfer Rate(PHY) | 1200Mbps |
Modulation | OFDM |
Plug Type | EU,UK,AU,US |
Operating System | Windows 98/ME/NT/2003/XP/7/10 Mac OSX, Linux |
Power Source | AC 100V-240V 60/50Hz |
Environmental | Working Temperature:0 ℃-70℃ |
Working Humidity 10%-90% non-condensed state | |
Size | W52mm*H93mm*D27mm |
Weight | 80g |
VPA1201W is the latest 1200Mbps wireless HomePlugAV2 Gigabit powerline Ethernet Bridge with 11ac WiFi 2T2R powerline adapter. The dual gigabit powerline adapter is the latest Powerline gigabit generation, and first time with the Integration of 11ac gigabit WiFi, the most innovative WiFi standard with the best performance. Now mobile devices such as smartphones, tablets and laptops can take advantage of the full bandwidth Internet connection in any room when there is a power socket. The Gigabit LAN port is available for additional terminal devices. Both data transmission over electrical wiring and wireless communication using WiFi ac (simultaneously at 2.4GHz and 5GHz) meet the latest state-of-the-art standards. HomePlugAV2+WiFi means WiFi anywhere. Faster and easier than ever before.
VPA1201W MIMO 1200Mbps powerline broadband extender is a sharp weapon for video surveillance and network extending. The Smart Link HomePlug AV2 1200Mbps Ethernet Bridge embarks on a concept of No New Wires data communications, and it transforms your in-house powerline into a networking infrastructure. It provides Smart Link Plus coupling to the Line-Neutral pair and the Line-Ground pair of the AC mains. It successfully reduces "dead spot" of WiFi coverage, increase throughput and increase network coverage within a home. Surf the Internet and share data at the speed up to 1Gbps (PHY rates) through powerline.
VPA1201W Smart Link HomePlugAV2 adapter’s engine is Qualcomm Atheros QCA7500 chip set, which features faster processing power, Gigabit Ethernet host interfaces and an enhanced analog front end. The solution is compliance with IEEE1901, HomePlug AV and HomePlug AV2, hence allowing hassle free compatibility with existing HomePlug AV2 devices and other suppliers of IEEE1901 PLC (Powerline Communication) devices, of course, VPA1201W itself and VPA1201 are preferred.
Product Features
* IEEE Compliant Wireless LAN and Wired LAN
* PLC 1200Mbps (PHY)
* Compliant with IEEE 802.11a/b/g/n/ac dual band, up to 300Mbps over 2.4GHz+ 867Mbps over 5GHz
* Compliant with HomePlugAV2 /HomePlug
* Equipped with all Gigabit RJ45 ports (10/100/1000Mbps) and auto MDI/MDI-X
* High-Speed powerline adapter with Ethernet interface for fast data transfer over the existing household power supply;
* No need new wires and use at any power socket for the range up to 500 meters;
* Allow user to connect PCs and other devices conveniently via any power outlet at home;
Comprehensive Wireless Advanced Features
* Supports WMM (Wi-Fi Multimedia) and wireless QoS to enhance the efficiency of multimedia application
* Supports multiple SSID
* Supports TX and RX restrict
* Secure Network Connection
* Supports Wi-Fi Protected Setup (WPS)
* Support WEP/WPA/WPA2 wireless security encryption
* Support HomePlug security encryption
Easy Installation and Management
* Web-based UI and Quick Setup Wizard for easy configuration
* Remote Management allows configuration from a remote site
Specifications:
Product | PLC1200Mbps & WiFi 1200Mbps 802.11ac Dual Band Wireless Gigabit Powerline Adapter Model VPA1200W | |
Hardware Specifications | ||
Interface | LAN Ports | 2* 10/100/1000 Mbps auto MDI/MDI-X RJ45 port |
Power Ports | 1* Power (AC) interface | |
Antenna | Gain | 2*3dBi 5.8G built-in antennas |
2*3dBi 2.4G built-in antennas | ||
Button | 1*Factory Default/WPS button | |
1*PLC button Pairing | ||
LED Indicators | WiFi | |
PLC | ||
Material | Plastic | |
Transfer frequency band | 2-68MHz | |
Dimensions (LxWxH) | 126*70*43mm (Excluding plug) | |
Net Weight | 0.22KG | |
Power Requirement | AC100-240V | |
Power Consumption | Maximum W/A:10.3/0.15 | |
Typical W/A:8.0/0.12 | ||
Stand-By W/A:2.1/0.11 | ||
Wireless Interface Specifications | ||
Standard | IEEE 802.11ac 5GHz | |
IEEE 802.11a/n 5GHz | ||
IEEE 802.11b/g/n 2.4GHz | ||
Frequency Band | Simultaneous 2.4GHz and 5GHz | |
802.11ac: OFDM (BPSK/QPSK/16QAM/64QAM/256QAM) | ||
Modulation Type | 802.11a/g/n: OFDM (BPSK/QPSK/16QAM/64QAM) | |
802.11b: DSSS (DBPSK/DQPSK/CCK) | ||
Data Rates | 2.4GHz up to 300Mbps | |
5GHz up to 867Mbps | ||
HomePlug: PHY rate:1200Mbps TCP/IP rate: 550Mbps | ||
Channel | 2.4GHz | FCC (America): 2.412~2.462GHz (11 Channels) ETSI (Europe): 2.412~2.472GHz (13 Channels) |
5GHz | 5.180-5.240GHz, 5.745-5.825GHz (up to 9 channels) | |
*The actual channels in application may vary depending on the regulation in different regions and countries. | ||
Channel Width | 802.11ac | 20/40/80MHz |
802.11n | 20/40MHz | |
Max. RF Power/EIRP | 2.4GHz | < 20dBm |
5GHz | < 20dBm | |
Receive Sensitivity | 2.4GHz | 11b (11Mbps): -79dBm |
11g (54Mbps): -68dBm | ||
11n (20M) mode: -67dBm | ||
11n (40M) mode: -64dBm | ||
5GHz | 11a: -74dBm | |
11n (20M) mode: -70dBm | ||
11n (40M) mode: -67dBm | ||
11ac (20M) mode: -67dBm | ||
11ac (40M) mode: -61dBm | ||
11ac (80M) mode: -57dBm | ||
SSID | 2.4GHz | Visonicom-2.4G |
5GHz | Visonicom-5G | |
Wireless Management Features | ||
Encryption Security | WEP,WPA/WPA2 personal mixed mode | |
Wireless Security | Wireless ACL MAC address filtering | |
Supports WPS (Wi-Fi Protected Setup ) | ||
Max. Supported Clients | 2.4GHz | 32 |
5GHz | 32 | |
IEEE Standards | IEEE 802.11ac/n/a/g/b IEEE 802.11i | |
IEEE 802.3 10BASE-T | ||
IEEE 802.3u 100BASE-TX | ||
Environment | ||
Temperature | Operating: 0 ~ 40 ℃ | |
Storage: -40 ~ 70 ℃ | ||
Humidity | Operating: 10 ~ 90% (non-condensing) | |
Storage: 5 ~ 95% (non-condensing) |
V4G1205DV Wireless AC1200 4-Port Gigabit LTE CPE with VoIP, VoLTE, CS and IPTV, is a highly integrated LTE wireless router with everything your home or small business needs for high-speed Internet access. The LTE wireless gateway combines Gigabit Ethernet Internet Ports, 4G mobile Internet support, Voice over IP (VoIP), Voice over LTE(VoLTE), Circuit Service (CS) and Gigabit wireless together in a single, easy to use product that shares an Internet connection for all your devices, enjoy IPTV and voice communications as well.
Global Mobile Broadband
3G/4G mobile connectivity lets you take your broadband connection with you wherever you go
Wireless AC and Gigabit Ethernet
Stream HD multimedia across your home without interruption using the fastest wired and wireless technologies available today
VoIP/VoLTE/CS/IPTV Support
Facilitates the implementation of various voice communications and IPTV service as well
Remote Management
TR069 support for simple remote management
Features
Connectivity
* Supports multiple WAN connections for flexibility, redundancy, and future connectivity
* Built-in LTE and ETH WAN for connecting to your high-speed broadband Internet connection
* Gigabit WAN port supports high-speed Internet connections of today and tomorrow
* Four Gigabit LAN ports to connect wired devices for high-speed online activities
* Fast 802.11ac wireless for high speed connections to all of your PCs and mobile devices
* USB 2.0 port to share media from a storage device
Security
* Wi-Fi Protected Setup (WPS) to quickly and securely add devices to your network
* WPA/WPA2 encryption to secure your wireless
Ease of Use
* Quick Setup Wizard
* Set up the V4G1205DV in no time with the web-based setup wizard, and create secure wireless connections easily using Wi-Fi Protected Setup (WPS)
Fast and Reliable Home Network
The V4G1205DV Mobile Wireless AC1200 4-Port Gigabit Modem Router with VoIP, VoLTE and CS creates a blazing fast home network that connects all of your devices to your broadband Internet connection. Concurrent dual-band 802.11ac brings you the future of high-bandwidth wireless connectivity, allowing you to stream HD video, make Internet voice calls, VoLTE and CS phone calls and surf the Internet from every corner of your home without interruption. Gigabit Ethernet ports provide high-speed wired connections for up to four PCs or other devices. It’s stylish, easy to use, and provides you with a reliable network for today and tomorrow.
Multiple Failover Redundancy and Future Connectivity
The V4G1205DV desktop Wireless AC1200 4-Port Gigabit LTE Router with VoIP, VoLTE and CS comes not only with a built-in high-speed CAT 4 LTE and Gigabit Ethernet WAN port. This means that if your primary connection method should fail, the V4G1205DV will automatically fall back to your pre-defined backup connection.
Voice Over IP
The V4G1205DV WiFi 1200 VoIP LTE CPE provides Voice over IP technology with advanced communication features, and is compatible with industry-wide phone services so you can make and receive calls reliably. Use the FXS phone port on the V4G1205DV to connect an ordinary phone set for your VoIP phone calls, and use the router functions to connect all of your family members or personal to the Internet for a fast and secure online experience throughout your home or office.
Smooth Streaming with Wireless AC
The V4G1205DV uses the latest Wireless AC technology, which provides transfer rates of up to 1.2 Gbps (866 AC + 300 N). The router operates on both the 2.4 GHz and 5 GHz wireless bands at the same time using concurrent dual- band technology and external antennas. This allows you to browse the web, chat and e-mail using the 2.4 GHz band, while simultaneously streaming digital media, playing online games, or making Internet voice calls on the 5 GHz band.
Designed for Optimal Wireless Coverage
The V4G1205DV WiFi 1200 LTE router’s antennas have been carefully designed to ensure that you will get little to no dead space in any environment. The high-powered amplifier sends the signal into the farthest corners of your home. Furthermore, the LTE Wireless AC1200 4-Port Gigabit Mobile Router with VoIP VoLTE CS’s multiple external antennas improve wireless reception by bringing signals to where they are most needed to achieve the best possible performance.
File Sharing Right at Your Fingertips
The V4G1205DV 4G LTE CPE lets you connect a USB storage device and instantly share documents, movies, pictures, and music. You can put your music library on a USB drive and share it with your entire home. You can show photos on the living room TV while a family member watches a movie on their computer.
You can stream media files to multiple devices without interruption, or save them to your device for offline playback. The intuitive interface lets anyone immediately connect to a variety of entertainment options stored securely on your own storage device.
Easy to Set Up and Secure
Setting up the V4G1205DV LTE desktop router is easy with the setup wizard. Simply open the setup utility and follow a few easy steps to get your home network up and running. You can also set up a secure network with the touch of a button using Wi-Fi Protected Setup (WPS). Simply press the respective WPS buttons on each device to instantly establish a secure connection to a new device. Rest assured that your network is secure with WPA/WPA2 wireless encryption and built-in dual active firewalls (SPI and NAT), so you can shop online and do your online banking with confidence.
Secure and Smooth Transmissions
The V4G1205DV Wireless AC1200 Dual-Band Gigabit LTE CPE has built-in dual active firewalls (SPI and NAT),so you can shop online and do your online banking with confidence. It is also equipped with WPA wireless security and access control to protect your network from unauthorized access and outside threats so you can use the Internet with confidence. In addition, QoS priority queues and packet prioritization minimize traffic congestion and deliver smooth VoIP and streaming media, providing you with the best possible Internet experience.
Specifications:
General | |||
Device Interface | * Four 10/100/1000 Gigabit LAN Ports | Power Button | |
* One 10/100/1000 Gigabit WAN Port | USB 2.0 Port | ||
* One FXS VoIP / VoLTE / CS Ports | WPS Button | ||
* 802.11 ac/n/g/b Wireless LAN1 | Reset Button | ||
* Cat 4 LTE(Qualcomm solution) | |||
Antenna Configuration | * Two 5 dBi external LTE Antennas. | ||
* Two 5 dBi external Wireless Antennas. | |||
Data Rate | * 2.4 GHz | * 5 GHz | LTE |
* 300 Mbps 1 | * 866 Mbps 1 | DL150Mbps UL 50Mbps | |
Standards | * IEEE 802.11ac | IEEE 802.3 | |
* IEEE 802.11n | IEEE 802.3u | ||
* IEEE 802.11g | IEEE 802.3ab | ||
* IEEE 802.11b | IEEE 802.3az | ||
* IEEE 802.3x | |||
Network Protocols | * RFC2516 PPP over Ethernet (PPPoE) | ||
* RFC1662 PPP in HDLC-like Framing | |||
* RFC1332 PPP Internet Protocol Control Protocol | |||
* Support ALG (Application Level Gateways) | |||
* DHCP Client | |||
Functionality | |||
Security | * WPA & WPA2 (Wi-Fi Protected Access) | * Wi-Fi Protected Setup (WPS) - PIN/PBC | |
Advanced Features | * Multi-language Web Setup Wizard | * Dual Active Firewall | |
* UPnP support | * VPN pass-through/multi-session PPTP/L2TP/IPSec | ||
* Multiple PVC (up to 8) | * 802.1p QoS | ||
Routing Features | * RFC768 User Datagram Protocol (UDP) | * Support source and destination routing | |
* RFC791 Internet Protocol (IP) | * Support DHCP server/client | ||
* RFC792 Internet Control Message Protocol (ICMP) | * Support UPnP | ||
* RFC793 Transmission Control Protocol (TCP) | * Support NAT, NAPT | ||
* RFC826 An Ethernet Address Resolution Protocol (ARP) | * Support DMZ | ||
* RFC862 Echo Protocol | * Support IP QoS | ||
* Support IP routing | * Support IGMP proxy | ||
* Support transparent bridging | * Support IPv6 | ||
Management Features | * Device Configuration, Management and Update | * WAN Management Protocol (TR-069) | |
* Web based GUI | * SNMP v1/v2 | ||
* Command Line Interface via serial port, telnet, or SSH | * PSI configuration file upload and download | ||
* Universal Plug and Play (UPnP) Internet Gateway Device | * Date/time update from SNTP Internet Time Server | ||
(IGDv1.0) | |||
VoIP FEATURE | |||
DSP Feature list | * FAX/data bypass | ||
* 711 pass through | |||
* T38 Fax Relay | |||
* Supports T.38 versions (06/98 to 03/02), V34 included. | |||
* V.152 FAX | |||
* T.38 over UDPTL - ASN.1 encoding/decoding of UDPTL packets (Packet loss, Recovery, Redundancy) | |||
* RTP/RTCP transfer | |||
* RTP/AVP - RFC3551 (formerly 1890) | |||
* RTP/RTCP - RFC3550 (formerly 1889) | |||
* Jitter Buffer | |||
* Static/dynamic, up to 200m | |||
* Caller ID generation | |||
* Support type 1 and type 2 | |||
* Format: Bellcore, ETSI FS | |||
* Codec support | |||
* G.711 A-Law | |||
* G.711 U-Law | |||
* G.722 | |||
* G.729 Annex A, B | |||
* Digital gain configuration | |||
* Range: +/- 20db step by 0.5db | |||
* The voice’s volume controlled by the Host per channel | |||
* On the fly modification | |||
* Packet time length | |||
* 10ms, 20ms, 30ms, 40ms | |||
* Packet Loss Concealment | |||
* Packet Loss Concealment – ITU-T G.711 Appendix I | |||
* G729 VAD&CNG | |||
* G.711 VAD&CNG | |||
* Voice Activity Detector, Comfort Noise Generation – ITU-T G.711 Appendix II | |||
* CNG RFC 3389 | |||
* DTMF generation &detection | |||
* ITU-T Q.23 and Q.24 | |||
* DTMF tones generation and detection compliant with the TIA 464B standard. | |||
* Echo Canceller | |||
* Echo canceller automatically enabled when both volume <=36dBm | |||
* Echo tail length (Up to 128ms) | |||
* Echo canceller disabled by 2100Hz tone with phase reversal. | |||
* Echo canceller must remove echo with ERL=0~3dB | |||
* Line EC, G.168-2004 compliant | |||
* Pulse Dial Detection | |||
* 3-Way conference | |||
* Tone generation | |||
* Call progress tones generation | |||
* Generate howler tones | |||
* Quad tone generation | |||
SIP/Call Control Feature List | * SIP Protocol | ||
* RFC 2617, HTTP Authentication: Basic and Digest Access Authentication. | |||
* RFC3428- Session Initiation Protocol (SIP) Extension for Instant Messaging | |||
* RFC3994- Indication of Message Composition for Instant Messaging | |||
* RFC2976- The SIP INFO Method | |||
* RFC3842-A Message Summary and Message Waiting Indication Event Package for the Session Initiation Protocol (SIP) | |||
* RFC 2976, The SIP INFO Method | |||
* RFC3310-Hypertext Transfer Protocol (HTTP) Digest Authentication Using Authentication and Key Agreement (AKA) | |||
* RFC4169-Hypertext Transfer Protocol (HTTP) Digest Authentication Using Authentication and Key Agreement (AKA) Version-2 | |||
* RFC4566, SDP: Session Description Protocol(new) | |||
* RFC 3264, An Offer –Answer Model with the SDP | |||
* RFC 3265 - SIP- Specific Event Notification | |||
* RFC 3311, The SIP UPDATE Method | |||
* RFC 3842, - A Message Waiting Indication Event Package for the SIP | |||
* RFC 3960, Early Media and Ringing Tone Generation in the SIP | |||
* RFC 3325, Private Extensions to the SIP for Asserted Identity within Trusted Networks (Partial) | |||
* RFC 3261, SIP: Session Initiation Protocol version 2 | |||
* RFC 2327, SDP: Session Description Protocol | |||
* RFC 3326, The Reason Header Field for SIP (Partial) | |||
* RFC 3515, The SIP REFER Method | |||
* RFC 3262, Reliability of Provisional Responses in the SIP | |||
* RFC 3263, SIP: Locating SIP Servers | |||
* RFC 3581, - An Extension to the SIP for Symmetric Response Routing | |||
* RFC 4028, Session Timers in the SIP | |||
* RFC 4566 - SDP Session Description Protocol | |||
* RFC4488- Suppression of Session Initiation Protocol (SIP) REFER Method Implicit Subscription | |||
* RFC3966 -The tel URI for Telephone Numbers | |||
* RFC4028-Session Timers in the Session Initiation Protocol (SIP) | |||
* RFC3093- Session Initiation Protocol (SIP) Extension for Event State Publication | |||
* RFC3605- Real Time Control Protocol (RTCP) attribute in Session Description Protocol (SDP) | |||
* RFC3608, Session Initiation Protocol (SIP) Extension Header Field for Service Route Discovery During Registration | |||
* RFC3327 Session Initiation Protocol (SIP) Extension Header Field for Registering Non-Adjacent Contacts | |||
* RFC3891 The Session Initiation Protocol (SIP) "Replaces" Header | |||
* RFC3892 The Session Initiation Protocol (SIP) Referred-By Mechanism | |||
* RFC3420 Internet Media Type message/sipfrag | |||
* RFC2046- Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types | |||
* RFC5621- Message Body Handling in the Session Initiation Protocol (SIP) | |||
* RFC4320-Actions Addressing Identified Issues with the Session Initiation Protocol's (SIP) Non-INVITE Transaction | |||
* RFC4321-Problems Identified Associated with the Session Initiation Protocol's (SIP) Non-INVITE Transaction | |||
* RFC5057-Multiple Dialog Usages in the Session Initiation Protocol | |||
* RFC4475-ession Initiation Protocol (SIP) Torture Test Messages | |||
* RFC5621-Message Body Handling in the Session Initiation Protocol (SIP) | |||
* RFC2833 - RTP Payload for DTMF Digits, Telephony Tones and Telephony Signals | |||
* IETF RFC 3310 HTTP Digest Authentication using Authentication and Key Agreement (AKA) when talking with the registration server. | |||
* IETF RFC 3311 The Session Initiation Protocol (SIP)UPDATE Method. | |||
* IETF RFC 2198 The redundancy function,RTP Payload for Redundant Audio Data | |||
* IETF RFC 3555 MIME Type Registration of RTP Payload Formats | |||
* IETF RFC 3388 Grouping of Media Lines in the Session Description Protocol (SDP) | |||
* IETF RFC 3489 STUN - Simple Traversal of User Datagram Protocol (UDP) Through Network Address Translators (NATs) | |||
* WMI (Support SIP Stack) | |||
* Call Feature | |||
* Busy Call Forward | |||
* Attended Call Transfer | |||
* Do not Disturb | |||
* Speed dial Number | |||
* Call waiting | |||
* 3-Way conference | |||
* No Reply Call Forward | |||
* Blind Call Transfer | |||
* Unconditional Call Forward | |||
* Hotline | |||
* A digit map of at least 256 characters. | |||
* Draft-rosenberg-midcom-turn-08, Traversal Using Relay NAT (TURN). |
As the China manufacturer of 4G LTE Fixed wireless phone, we’re proud to be the China supplier of V4P720W 4G LTE VoLTE desktop phone with WiFi support for both voice and data communications. Besides the TDD-LTE B38/B39/B40/B41 and FDD-LTE B1/B2/B3/B5/B8 support, it backward supports 3G WCDMA network B1/B2/B5/B8 (bands optional) and 2G GSM network 850/900/1800/1900MHz for voice communications. It also can work as a wireless router to offer WiFi connection for other devices for internet access and data communications.
The LTE 4g wireless desktop phone also supports Bluetooth and Micro SD card (Optional). The color LCD display shows the functions and working status clearly.
The 4G desktop phone with WiFi also supports FM, calculator, calendar, and alarm.
Last but not least, the sim card-based landline phone with WiFi supports all the functions that traditional PSTN phones do.
Basic Features
1) Support IPV6
2) Support FM
3) Support WiFi Hotspot
4) Support TF card (optional)
5) Support Spanish/Portuguese/English/Myanmar(optional)
6) Support VoLTE
7) TDD-LTE network: B38/B39/B40/B41
FDD-LTE network: B1/B2/B3/B5/B8
WCDMA network: B1/B2/B5/B8 (bands optional)
GSM network:850/900/1800/1900MHz
8) 2.4inch color LCD
9) TNC external antenna
Shortcut Keys
Numerical keys 2 to 9 can be set as shortcut, and the number can be chosen in contact.
After continuously pressing the keys over 3 seconds can dial out directly, support one key to dial
Voice call
High performance call
Emergency call
Call forwarding, call waiting, call divert, etc.
Redial function
Shortcut keys settings
4 Speed dial numbers
Wi-Fi hotspot
Supports wireless router function for internet access for other
Supports setting Wi-Fi hotspot, SSID, security mode and password parameters
Supports WPA2-PSK encryption
Supports check the connected devices and connected devices quantity
Other function
Supports Blue tooth
Supports internet access through WLAN
Wireless Network available through WLAN or WAP
Supports calculator, calendar, alarm
Specifications:
Product | 4G LTE Fixed Wireless Phone with WiFi Model No. V4P720W | |
Working frequency | GSM/GPRS/EDGE(GSM): 850/900/1800/1900MHz | |
UMTS/HSPA+(WCDMA):B1/B2/B5/B8 (optional) | ||
TDD-LTE: B38/B39/B40/B41 | ||
FDD-LTE: B1/B2/B3/B5/B8 | ||
LCD | 240 × 32dots, backlight function | |
Storage | Call history | Answered calls 20pcs; dialed calls 20pcs; missed calls 20pcs |
SMS | 450+SIM card Two-way messaging | |
Contact | 500+SIM card quick search | |
Feature | Main feature | Make & Answer calls, Send & Receive SMS, Contacts, WLAN, Network function. |
Supplement feature | Emergency call, Call waiting, Call delay, Call forwarding, Blue tooth, Calendar, Calculator, Exchange rate, Stop watch , etc. | |
Standby Time | Standby time | 120 hours When the WLAN is off |
Talk time | 3.0 hours | |
Recharge time | <8 hours | |
Power adapter | Power adapt | DC 5V / 500mA |
Battery | 3.7V/800mAh | |
Ambient Noise | ≤60dB(A) | |
Receiver Sensitivity | -104dBm | |
Air Pressure | 86-106KPa | |
Environmental | Working Humidity & Temperature | -10℃~50℃, 0%~95%(no condensation) |
Accessories | Accessories | User manual, Power adapter |
Mechanical | Size | 207.5mm*177mm*80.5mm |
Weight (kg) | 0.46 | |
Color | Black/White | |
Packing list | Handset | 1pc |
Phone unit | 1pc | |
Coiled cord | 1pc | |
Li + Battery | 1pc(3.7V/800mAh) | |
Power adapter | 1pc,(100-240VCN/EU/UK type optional) | |
User manual | 1pc | |
TNC antenna | 1pc | |
Shipping data | Gift box | 26*16*7cm |
Carton size | 52.5*36.5*34.5cm | |
Quantity/carton | 20pcs | |
Carton weight | 15kgs | |
20'GP | 8500pcs(425 cartons) | |
40'GP | 17000pcs(850 cartons) |
Universal Support
ClickJect(V100) FHD 2.4G+5G dual band 600Mbps + 1200Mbps wireless presentation system is a unique WiFi Presentation solution for all. The wireless presentation kit enable users
1) to wirelessly present directly from any device with HDMI output, or
2)mobile devices and PCs to projectors, televisions, displays, and digital signage without third party software.
No Driver Installation, No Software needed, Simply One Click and Go
ClickJect(V100) wireless presentation system consists of 1-4 wireless presentation senders and 1 wireless presentation receiver. Any device with HDMI output can be connected with the wireless senders and, the receiver can be connected with any device with HDMI or VGA or CVBS input. Thus content of any device with HDMI port can be presented wirelessly without any software even driver or any configuration. Driver-free, software-free, and One-click wireless presentation have the system stand out among the presentation systems in market.
Meanwhile even without the wireless presentation senders, the wireless presentation receiver can work in another mode, as itself still supports Miracast, AirPlay and DLNA for the wireless presentation from iOS devices of iPhone and iPad families, Mac PC, Windows PC, Android Smartphones and tablet PCs.
In general, ClickJect(V100) Wireless Presentation System is a high-end universal wireless presentation solution for business and education industry, and for home entertainment as well.
Further info please refer to our Wireless Presentation Portfolio Site.